AIT KKMTF Konsan Fabric Inspection Machine

AIT KKMTF Konsan Fabric Inspection Machine

The Model KKMTF is a fabric inspection machine for tension free inspection of stretch fabrics including Lycra. The machine is suitable for inspection of rolls up to 300 lb., and a maximum roll diameter of 18'.

The AIT Fabric Inspection and Measurement Machines have been designed and produced in order to prevent problems and cost increases that may arise in sewing departments of apparel industries due to production faults in the fabric. Model KKMTF features an edge alignment system for reducing selvedge and obtaining the maximum use of fabric.

Features

  • Independently controlled unwind and rewind cradles, with electronic synchronization for tension-free rewinding without stretching for woven and knit fabrics, including lycra and other elastic materials
  • Automatic edge guide system for accurate rewinding in order to reduce selvage during cutting
  • Reversing feature to allow rewinding with print side in or out, and fabric inspection in both directions
  • Independent overhead lamp and rear light box with three illumination levels
  • Electronic counter for measuring in feet, yards or meters
  • Casters for mobility
  • Automatic stop feature at end of roll
  • Additional start/stop buttons in center of overhead lamp assembly
  • Roll widths up to 60 inches (1.6 m)
  • Roll weights up to 330 lbs (150 kg)
  • Roll diameters up to 18 inches (45 cm)

Specifications

KK160MT
KK160MT-F
KK190MT
KK190MT-F
KK210MT
KK210MT-F
Max Fabric Width 63" (160cm) 75" (190cm) 83" (210cm)
Max Fabric Roll Diameter 16" (40cm) 16" (40cm) 16" (40cm)
Max Fabric Weight 150 kg 150 kg 150 kg
Machine Width 69" (175cm) 69" (175cm) 69" (175cm)
Machine Length 90" (265cm) 96" (278cm) 100" (290cm)
Machine Height 75" (190cm) 75" (190cm) 75" (190cm)
Max Speed 60m/min 60m/min 60m/min
Machine Weight
MT
MT-F
430 kg
530 kg
480 kg
580 kg
535 kg
635 kg

Electrical

KK___MT KK___MT-F
USA 220 VAC/1 Phase/50-60 Hz 220 VAC/3 Phase/60 Hz
Other 220 VAC/1 Phase/50-60 Hz 380 VAC/3 Phase/50 Hz

Literature